Gigabyte GA-H61M-S2PH Manual - Page 25

Serial Port A/B, IntelR Rapid Start Technology

Page 25 highlights

&& Intel(R) Rapid Start Technology Enables or disables Intel® Rapid Start Technology. This item is configurable only when an SSD is installed. (Default: Disabled) && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && USB Storage Devices Displays a list of connected USB mass storage devices. This item appears only when a USB storage device is installed. && OnBoard LAN Controller#1 Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. `` Super IO Configuration This section provides information on the super I/O chip and allows you to configure the serial port and parallel port. && Serial Port A/B Enables or disables the onboard serial port. (Default: Enabled) && Parallel Port Enables or disables the onboard parallel port. (Default: Enabled) && Device Mode This item is configurable only when Parallel Port is set to Enabled. Selects an operating mode for the onboard parallel (LPT) port. (Default), EPP Mode (Enhanced Parallel Port), ECP Mode (Extended Capabilities Port), EPP Mode & ECP Mode. `` Intel(R) Smart Connect Technology && ISCT Configuration Enables or disables Intel® Smart Connect Technology. (Default: Disabled) - 25 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

- 25 -
&
Intel(R) Rapid Start Technology
Enables or disables Intel
®
Rapid Start Technology. This item is configurable only when an SSD is installed.
(Default: Disabled)
&
Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
&
EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
&
Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
&
USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
&
OnBoard LAN Controller#1
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled
.
`
Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port and
parallel port.
&
Serial Port A/B
Enables or disables the onboard serial port. (Default: Enabled)
&
Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
&
Device Mode
This item is configurable only when
Parallel Port
is set to
Enabled
. Selects an operating mode for the
onboard parallel (LPT) port. (Default), EPP Mode (Enhanced Parallel Port), ECP Mode (Extended Capabilities
Port), EPP Mode & ECP Mode.
`
Intel(R) Smart Connect Technology
&
ISCT Configuration
Enables or disables Intel
®
Smart Connect Technology. (Default: Disabled)