Gigabyte GA-H61N-D2V Manual - Page 31

LAN PXE Boot Option ROM, DVMT Total Memory Size - driver

Get Gigabyte GA-H61N-D2V PDF manuals and user guides View all Gigabyte GA-H61N-D2V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

&& LAN PXE Boot Option ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode. IDE Configures the SATA controller to IDE mode. (Default) AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. && USB2.0 Controller Enables or disables the integrated USB 2.0 controller. (Default: Enabled) && Audio Controller Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. && Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card or the onboard graphics. Auto Lets BIOS automatically configure this setting. (Default) IGFX Sets the onboard graphics as the first display. PCI Sets the graphics card on the PCI slot as the first display. && Internal Graphics Enables or disables the onboard graphics function. (Default: Auto) && Internal Graphics Memory Size Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M) && DVMT Total Memory Size Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX. (Default: MAX) && Intel(R) Rapid Start Technology Enables or disables Intel Rapid Start Technology. This item is configurable only when an SSD is installed. (Default: Disabled) && Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) && EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) && Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) && USB Storage Devices Displays a list of connected USB mass storage devices. You can configure how each device is going to be treated. For example, you can emulate a USB flash drive as a floppy disk drive. (Default: Auto) - 31 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
- 31 -
LAN PXE Boot Option ROM
&
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default:
Disabled)
SATA Controller(s)
&
Enables or disables the integrated SATA controllers. (Default: Enabled)
SATA Mode Selection
&
Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode.
IDE
Configures the SATA controller to IDE mode. (Default)
±
AHCI
Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
±
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
USB2.0 Controller
&
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
Audio Controller
&
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled
.
Init Display First
&
Specifies the first initiation of the monitor display from the installed PCI graphics card or the onboard
graphics.
Auto
Lets BIOS automatically configure this setting. (Default)
±
IGFX
Sets the onboard graphics as the first display.
±
PCI
Sets the graphics card on the PCI slot as the first display.
±
Internal Graphics
&
Enables or disables the onboard graphics function. (Default: Auto)
Internal Graphics Memory Size
&
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)
DVMT Total Memory Size
&
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)
Intel(R) Rapid Start Technology
&
Enables or disables Intel Rapid Start Technology. This item is configurable only when an SSD is installed.
(Default: Disabled)
Legacy USB Support
&
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
EHCI Hand-off
&
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
Port 60/64 Emulation
&
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
USB Storage Devices
&
Displays a list of connected USB mass storage devices. You can configure how each device is going to be
treated. For example, you can emulate a USB flash drive as a floppy disk drive. (Default: Auto)