Gigabyte GA-J1800N-D2P User Manual - Page 20

&& CPU C state Report Enables or disables support for CPU's power-saving functions. (Default: Enabled) && Enhanced C state Enables or disables Intel® CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. This item is configurable only when CPU C state Report is enabled. (Default: Enabled) && Max CPU C-state Allows you to determine the maximum C state that the CPU will support. Options include: C7, C6, C1 (default). This item is configurable only when CPU C state Report is enabled. `` Thermal Configuration && DTS Enables or disables the CPU overheating protection function. (Default: Disabled) && Critical Trip Point Allows you to set the CPU temperature threshold. If the CPU temperature reaches this value, the operating system will shut down the system. This item is configurable only when DTS is enabled. (Default: 100 C) && Passive Trip Point Allows you to set the CPU temperature threshold. If the CPU temperature reaches this value, the CPU frequency will be automatically reduced. This item is configurable only when DTS is enabled. (Default: 85 C) `` IDE Configuration && Serial-ATA (SATA) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode. This item is configurable only when Serial-ATA(SATA) is set to Enabled. IDE Mode Disables RAID for the SATA controllers and configures the SATA controllers to IDE mode. AHCI Mode Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && Serial-ATA Port 0/Serial-ATA Port 1 Enables or disables each SATA port. This item is configurable only when Serial-ATA(SATA) is set to Enabled. The area below displays the current status of each SATA port. (Default: Enabled) `` Network Stack Configuration && Network stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server. (Default: Disabled) && Ipv4 PXE Support Enables or disables IPv4 PXE Support. This item is configurable only when Network stack is enabled. && Ipv6 PXE Support Enables or disables IPv6 PXE Support. This item is configurable only when Network stack is enabled. - 20 -