Gigabyte GA-MA770-S3P Manual - Page 54
CPU Host Clock Control, CPU Frequency MHz, Set Memory Clock, Memory Clock
View all Gigabyte GA-MA770-S3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
CPU Host Clock Control, CPU Frequency (MHz), Set Memory Clock, Memory Clock The settings under the four items above are synchronous to those under the same items in the MB Intelligent Tweaker(M.I.T.). DCTs Mode (Note) Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. DDRII Timing Items Manual allows all DDRII Timing items below to be configurable. Options are: Auto (default), Manual. CAS# latency Options are: 3T (default), 4T, 5T, 6T. RAS to CAS R/W Delay Options are: 3T (default), 4T, 5T, 6T. Row Precharge Time Options are: 3T (default), 4T, 5T, 6T. Minimum RAS Active Time Options are: 5T~18T. (Default: 18T) 1T/2T Command Timing Options are: 1T (default), 2T. TwTr Command Delay Options are: 1T, 2T, 3T (default). Write Recovery Time Options are: 3T (default), 4T, 5T, 6T. Precharge Time Options are: 2T, 3T (default). Row Cycle Time Options are: 11T~26T. (Default: 26T) RAS to RAS Delay Options are: 2T, 3T, 4T, 5T (default). ******** System Voltage Optimized ******** System Voltage Control Determines whether to manually set the system voltages. Auto lets BIOS automatically set the system voltages as required. Manual allows all voltage control items below to be configurable. (Default: Manual) DDR2 Voltage Control Allows you to set memory voltage. Normal +0.025V ~ +0.350V Supplies the memory voltage as required. (Default) Increases memory voltage by 0.025V to 0.350V at 0.025V increment. (Note) This item is present only if you install a CPU that supports this feature. GA-MA770 Series Motherboard - 54 -