Gigabyte GA-P75-D3 User Manual - Page 47
IntelR Rapid Start Technology
View all Gigabyte GA-P75-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
& Audio Controller Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. & Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express graphics card. Auto Lets BIOS automatically configure this setting. (Default) PEG Sets the PCI Express graphics card on the PCIEX16 slot as the first display. PCI Sets the graphics card on the PCI slot as the first display. & Intel(R) Rapid Start Technology Enables or disables Intel Rapid Start Technology. This item is configurable only when an SSD is installed. (Default: Disabled) & Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) & USB3.0 Support Enables or disables the integrated USB 3.0 controller. (Default: Enabled) & XHCI Hand-off Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off support. (Default: Enabled) & EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) & Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices. (Default: Disabled) & USB Storage Devices Displays a list of connected USB mass storage devices. You can configure how each device is going to be treated. For example, you can emulate a USB flash drive as a floppy disk drive. (Default: Auto) ` Trusted Computing & TPM SUPPORT Enables or disables Trusted Platform Module (TPM). Set this item to Enabled when a TPM device is installed. (Default: Disabled) & OnBoard LAN Controller#1 Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. - 47 - BIOS Setup