Gigabyte GA-Z270M-D3H Users Manual - Page 14
SATA EXPRESS SATA Express Connector, SATA3 0/1/2/3/4/5 SATA 6Gb/s Connectors
View all Gigabyte GA-Z270M-D3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
_ B S B_ B _S S_ _ B _U _ B F_USB3 F 23 B S_ B 1 23 S B_ S3 B SS S U S 5) SATA EXPRESS (SATA Express Connector) S Each SATA Express connector supports a single SATA Express device. S_ S_ S3 S_ SF B SS S _U S _S _ _ __ 3 __ 3 6) S_ SATA3 0/1/2/3/4/5 (SATA 6Gb/s CoFnneBc_ tors)S F The SATA connectors conform to SATA 6Gb/s standard S and _S are _ compatible w_ith SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel® Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. S_ SATA3 5 4 10 7 S_ U _0 1 B_ B_ S _S SATA3 3 2 Pin No. 1 _2 3 Definition GND TXP TXN 7 1 4 GND 5 RXN _F S_ 6 RXP 7 _ GND To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Peripherals\SATA And RST Configuration," for more information. U B_ _0 F 7) M2S_32_ G (M.2 Socket 3 Connector) The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs and support R_AID configuration through the Intel® Chipset. Please note that an M.2 PCIe SSD cannot be used to create a RAID set either with an M.2 SATA SSD or a SATA hard drive and can only be used to build a RAID set with UEFI. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring a RAID array. _ _B _ _ _B S_ 110 80 60 42 Follow the steps below to correctly install an M.2 SSD in the M2_32G connector. Step 1: UseUa screw driver to Bu_nfasten the screw and nut from the motherboard. Locate the proper mounting hole for the M.2 SSD to be installed and then screw the nut first. Step 2: Slide the M.2 SSD into the connector at an angle. Step 3: Press the M.2 SSD down and then secure it with the screw. U Select the propB_er hole for the M.2 SSD to be installed and refasten the screw and nut. - 14 -