Gigabyte GA-Z270X-Gaming SOC Users Manual - Page 11
Support for RAID 0, RAID 1, and RAID 10, x CPU Ratio Down button
View all Gigabyte GA-Z270X-Gaming SOC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Storage Interface USB Internal Connectors Chipset: - 2 x M.2 connectors (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2 SSD support) - 1 x U.2 connector - 2 x SATA Express connectors - 6 x SATA 6Gb/s connectors (SATA3 0~5) - Support for RAID 0, RAID 1, RAID 5, and RAID 10 * Refer to "1-10 Internal Connectors," for the installation notices for the PCIEX4_1/M.2/ SATA connectors. ASMedia® ASM1061 chip: - 2 x SATA 6Gb/s connectors (SATA3 6, 7), supporting AHCI mode only Chipset+ASMedia® USB 3.1 Gen 2 Controller: - 1 x USB Type-C™ port on the back panel, with USB 3.1 Gen 2 support - 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel Chipset: - 8 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports onboard, 2 ports available through the internal USB header) - 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header) 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x 4-pin ATX 12V power connector 1 x U.2 connector 2 x M.2 Socket 3 connectors 2 x SATA Express connectors 8 x SATA 6Gb/s connectors 1 x CPU fan header 1 x water cooling CPU fan header 2 x system fan headers 1 x system fan/water cooling pump header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.1 Gen 1 header 2 x USB 3.1 Gen 1 ports 1 x USB 2.0/1.1 header 1 x OC Touch header 1 x RGB (RGBW) LED strip extension cable header 1 x Thunderbolt™ add-in card connector 1 x Clear CMOS jumper 1 x power button 1 x reset button 1 x Clear CMOS button 1 x OC Turbo button 1 x CPU Ratio Down button 1 x CPU Ratio Up button 1 x audio gain control switch 1 x BIOS switch 1 x DualBIOS™ switch - 11 - Hardware Installation