Gigabyte GA-Z77X-D3H Manual - Page 26

8) GSATA3 6/7 (SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 Chip) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standard. Each SATA connector supports a single SATA device. The Marvell 88SE9172 chip supports RAID 0 and RAID 1. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. GSATA3 G.QBOFM Pin No. Definition 1 GND 2 TXP 7 17 3 TXN 7 16 4 GND 5 RXN 6 RXP 7 GND F_AUDIO(H) A RAID 0 or RAID 1 configuration reqF_uPiAreNsELtw(NoH)hard drives. F_PANEL (H61M-D2) EBUG ORT 9) MSATA (Solid-State Drive Connector, Controlled by the Intel Z77 Chipset) The mSATA connector conforms to SATA 3Gb/s standard and can connect to a single solid-state drive. When the mSATA connector is installed with a solid-state drive, the SATA2 5 connector will become unavailable. DB_PORT BIOS Switcher (X58A-OC) 1 mSATA M_SATA Voltage measurement module(X58A-OC) PWM Switch (X58A-OC) ACPI_CPT (GA-IVB) DIP 1 23 1 DIP 1 23 1 DIP 1 23 1 DIP 1 23 PCIe power connector (SATA)(X58A-OC) SMB_CPT (GA-IVB) nts(G1.Sniper 3) Hardware Installation BIOS Switcher (SW4) - 26 - CLR_CMOS CI DIS_ME GP15_CPT (GA-IVB) XDP_CPU XDP_PCH (GA-IVB)