Gigabyte GA-Z77X-D3H Manual - Page 75
D. Enabling the Intel Rapid Start Technology in BIOS Setup
View all Gigabyte GA-Z77X-D3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
DISKPART>detail disk DISKPART>select volume X DISKPART>set id=84 override (Displays the properties of the selected disk and the volumes on that disk) (Selects the specified volume. "X" is volume of your store partition. Refer to the results from "detail disk" for exact volume number) (Change the partition type) (Figure 3) GPT format: Follow the commands for MBR format. When you execute the last command where you change the partition type (set id="XXX"), enter the following command instead (Figure 4): DISKPART>set id=D3BFE2DE-3DAF-11DF-BA40-E3A556D89593 You have created the Intel Rapid Start Technology store partition after completing the commands above. Restart your computer. Figure 3 Figure 4 D. Enabling the Intel Rapid Start Technology in BIOS Setup 1. When the system restarts, press to enter the BIOS Setup program. Go to the Peripherals menu and set Intel Rapid Start Technology to Enabled. 2. Save the settings and exit BIOS Setup. E. Installing and Configuring the Intel Rapid Start Application 1. While in the operating system, insert the motherboard driver disk, go to Application Software\Install Application Software, and select Intel Rapid Start Technology to install. After the installation is complete, we recommend that you restart the system. 2. Launch the Intel Rapid Start Technology Manager application from Start\All Programs\Intel or click the icon in the notification area. Instructions: The Intel Rapid Start application allows you to enable or disable the Intel Rapid Start Technology. The Timer slider in Advanced Settings allows you to set when to copy and move the data from the memory to the SSD after entering S3 mode. - 75 - Unique Features