Gigabyte GA-Z77X-D3H Manual - Page 98
For the Marvell 88SE9172, Marvell shared library, Marvell 91xx SATA RAID Controller, Marvell 91xx SATA
View all Gigabyte GA-Z77X-D3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
For the Marvell 88SE9172: Insert the floppy disk containing the SATA RAID/AHCI driver and press . Select either the 32-bit or 64-bit items depending on whether you want to install the 32-bit or 64-bit version of Windows XP (Figure 4). Both of the Marvell shared library and Marvell 91xx SATA RAID Controller need to be installed. Below we assume that you are installing the 32-bit version. First select Marvell shared library for 32bit (install first) and press . On the next screen, press to return to the screen in Figure 4. Then select Marvell 91xx SATA RAID Controller 32bit Driver and press . When both of the two drivers appear on the confirmation screen, press to continue the driver installation. Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Marvell shared library for 32bit (install first) Marvell 91xx SATA RAID Controller 32bit Driver Marvell shared library for 64bit (install first) Marvell 91xx SATA RAID Controller 64bit Driver ENTER=Select F3=Exit Figure 4 Step 3: On the next screen, press to continue the driver installation. After the driver installation, you can proceed with the Windows XP installation. Appendix - 98 -