Gigabyte GA-Z77X-UD4H Manual - Page 95
Installing the SATA RAID/AHCI Driver and Operating System, A. Installing Windows 7
View all Gigabyte GA-Z77X-UD4H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
5-1-3 Installing the SATA RAID/AHCI Driver and Operating System With the correct BIOS settings, you are ready to install Windows 7/XP. A. Installing Windows 7 For the Intel Z77: As Windows 7 already include Intel SATA RAID/AHCI driver, you do not need to install separate RAID/AHCI driver during the Windows installation process. After the operating system is installed, we recommend that you install all required drivers from the motherboard driver disk using "Xpress Install" to ensure system performance and compatibility. For the Marvell 88SE9172: Step 1: Copy the Marvell folder under BootDrv in the driver disk. Step 2: Boot from the Windows 7 setup disk and perform standard OS installation steps. When the screen requesting you to load the driver appears, select Browse. Step 3: Insert the motherboard driver disk and then browse to the location of the driver. The locations of the drivers are as follows: Windows 32-bit: \storport\i386 Windows 64-bit: \storport\amd64 Step 4: When a screen as shown in Figure 1 appears, select Marvell 91xx SATA 6G RAID Controller and click Next to load the driver and continue the OS installation Figure 1 - 95 - Appendix