Gigabyte GN-AP03G User Manual - Page 14

Channel Number, Transmit Rate, 11g Only Mode, Hidden ESSID, all users are able to read your, AP's

Get Gigabyte GN-AP03G PDF manuals and user guides View all Gigabyte GN-AP03G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

GN-AP03G AirCruiser G Range Extender SSID ESSID (or SSID as it is usually referred to) is the network name of the Range Extender in the wireless network. You should set the same SSID name for all your wireless-equipped devices to allow dynamic clients to easily roam among them. The SSID name can be up to 32 characters in length and is case sensitive (i.e. upper case letters "A~Z" and lower case "a~z" are unique). Channel Number Please choose the channel for best performance. Normally, no change is needed. Transmit Rate Select the desired data rate. The range is from 1 to 54Mbps and the default rate is set to "Auto". 802.11g Only Mode Enabled -- No Wireless-B clients will be allowed on the network. Disabled - Both Wireless-G and Wireless-B clients will be allowed on the network. (Default setting) Hidden ESSID This setting enables you to hide ESSID name, which is needed by clients in order to connect to the Range Extender. The default value is "Disable". In this setting, all users are able to read your AP's SSID name. RF Radio Enable or disable the RF Radio function. Associated Clients Click "Show Active Clients" button to obtain the connecting users' information. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
GN-AP03G AirCruiser G Range Extender
SSID
ESSID (or SSID as it is usually referred to) is the network name of the Range Extender in the wireless
network. You should set the same SSID name for all your wireless-equipped devices to allow dynamic
clients to easily roam among them. The SSID name can be up to 32 characters in length and is case
sensitive (i.e. upper case letters
“A~Z”
and lower case
“a~z”
are unique).
Channel Number
Please choose the channel for best performance. Normally, no change is needed.
Transmit Rate
Select the desired data rate. The range is from 1 to 54Mbps and the default rate is set to “Auto”.
802.11g Only Mode
Enabled
-- No Wireless-B clients will be allowed on the network.
Disabled –
Both Wireless-G and Wireless-B clients will be allowed on the network. (Default setting)
Hidden ESSID
This setting enables you to hide ESSID name, which is needed by clients in order to connect to the
Range Extender. The default value is
“Disable”
.
In this setting,
all users are able to read your
AP’s SSID name.
RF Radio
Enable or disable the RF Radio function.
Associated Clients
Click
“Show Active Clients”
button to obtain the connecting users’ information.
10