Gigabyte GS-R12P4S Manual - Page 19
Installing the PCI Expansion Card
View all Gigabyte GS-R12P4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2-5 Installing the PCI Expansion Card • Voltages can be present within the server whenever an AC power source is connected. This voltage is present even when the main power switch is in the off position. Ensure that the system is powered-down and all power sources have been disconnected from the server prior to installing a PCI card. Failure to observe these warnings could result in personal injury or damage to equipment. • The PCI riser assembly does not include a riser card or any cabling as standard. To install a PCI card, a riser card must be installed. Follow these instructions to PCI Expansion card: 1. Loosen the riser bracket screw and lift the riser bracket slightly.Loosen the riser bracket screws. 1. Loosen the PCI bracket screw. 2. Orient the PCI card with the riser guide slot and push in the direction of the arrow until the PCI card sits in the PCI card connector. Secure the PCI card with the screw. 1 2 2 Hardware Installation - 19 -