Gigabyte GS-R12P4S Manual - Page 54

Compatibility RID, Total Memory, Current Memory Mode, Current Memory Speed, Memory Mode, DIMM

Get Gigabyte GS-R12P4S PDF manuals and user guides View all Gigabyte GS-R12P4S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Compatibility RID Enable/Disable Compatibility RID function. Options available: Enabled/Disabled. Default setting is Enabled. Memory Configuration Total Memory Determines how much total memory is present during the POST. Current Memory Mode Displays the cuurent memory mode. Memory mode can be determined in Memory Mode item. Current Memory Speed Displays the cuurent memory speed. Memory Mode Determine the memory mode. When set to Indendent mode, all DIMMs are available to the operation system. When set to Mirroring mode, the motherboard maintains two identical (redundant) copies of all data in memory. When set to Lockstep mode, the motherboard uses two areas of memory to run the same set of operations in parallel. When set to Sparing mode, a preset threshold of coorectable errors is used to trigger fail-over. The spare memory is put online and used as active memory in place of the failed memory. Options available: Indendent /Mirroring/ Lockstep/Sparing. Numa Enable/Disable Non Uniform Memory Access (NUMA) function. Options available: Enabled/Disabled. Default setting is Enabled. DIMM Voltage Configure the DIMM voltage. Options available: Auto/ Force 1.5v/Force 1.35v. Default setting is Auto. Enforce DIMM To enforce POR function. When disabled, the system will enforce 1600MHz LRDIMM. Options available: Enforce EN/Stretch EN/Enforce DIS. Default setting is Enforce EN. To clear ECC Flag When DDR3 Channel is maskoff after ECC multibit errors, it is required to clear ECC flag to make masked off channels be available. Options available: None/To clear ECC Flag when save and exit. Default setting is None. BIOS Setup - 55 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
BIOS Setup
- 55 -
Compatibility RID
Enable/Disable Compatibility RID function.
Options available: Enabled/Disabled. Default setting is
Enabled
.
Memory Configuration
Total Memory
Determines how much total memory is present during the POST.
Current Memory Mode
Displays the cuurent memory mode. Memory mode can be determined in
Memory Mode
item.
Current Memory Speed
Displays the cuurent memory speed.
Memory Mode
Determine the memory mode.
When set to Indendent mode, all DIMMs are available to the operation system.
When set to Mirroring mode, the motherboard maintains two identical (redundant) copies of all data in
memory.
When set to Lockstep mode, the motherboard uses two areas of memory to run the same set of
operations in parallel.
When set to Sparing mode, a preset threshold of coorectable errors is used to trigger fail-over.
The spare memory is put online and used as active memory in place of the failed memory.
Options available: Indendent /Mirroring/ Lockstep/Sparing.
Numa
Enable/Disable Non Uniform Memory Access (NUMA) function.
Options available: Enabled/Disabled. Default setting is
Enabled
.
DIMM Voltage
Configure the DIMM voltage.
Options available: Auto/ Force 1.5v/Force 1.35v. Default setting is
Auto
.
Enforce DIMM
To enforce POR function. When disabled, the system will enforce 1600MHz LRDIMM.
Options available: Enforce EN/Stretch EN/Enforce DIS. Default setting is
Enforce EN
.
To clear ECC Flag
When DDR3 Channel is maskoff after ECC multibit errors, it is required to clear ECC flag to make
masked off channels be available.
Options available: None/To clear ECC Flag when save and exit. Default setting is
None
.