Gigabyte GS-R22PHL Manual - Page 21
Installing the PCI Expansion Card
View all Gigabyte GS-R22PHL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
2-6 Installing the PCI Expansion Card • Voltages can be present within the server whenever an AC power source is connected. This voltage is present even when the main power switch is in the off position. Ensure that the system is powered-down and all power sources have been disconnected from the server prior to installing a PCI card. Failure to observe these warnings could result in personal injury or damage to equipment. For GPU0/GPU1/GPU6/GPU7 Follow these instructions to install PCI Expansion card: 1. Loosen and remove the screws securing the PCI cage. 2. Pull the two plastic handles to lift up the PCI cage from the system. 3. Insert the card into the selected slot and secure the expansion card with screw. Make sure that the card is properly seated. 4. Secure the PCI expansion cards in place with screws. Top: GPU Card #6 (Slot 1) Bottom: GPU Card #7 (Slot 2) Front Rear Top: GPU Card #0 (Slot 1) Bottom: GPU Card #1 (Slot 2) 1 1 2 2 - 21 - Hardware Installation