Gigabyte GV-N40128TE Manual - Page 3
Hardware Installation - card
 |
View all Gigabyte GV-N40128TE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
English 2) GV-N40128TE/GV-N4064T RCA S-Video VGA M onitor Connector (15 pins) NTSC / PAL TV AV Output NTSC / PAL TV P rojector AV Output S -V ideo O utput or RC A S-Video VG A Monitor Connector (15 pins) Analog LCD M onitor A nalog Monitor 2. Hardware Installation Installing your graphics card. Now that you have prepared your computer, you are ready to install your graphics card. 1. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. 2. Replace the screw to fasten the card in place, and replace the computer cover. 3. Plug the display cable into your card; then turn on the computer and monitor. - 3 -
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
- 3 -
English
Installing your graphics card.
Now that you have prepared your computer, you are ready to install your graphics card.
2. Hardware Installation
2.
Replace the
screw to fasten
the card in place,
and replace the
computer cover.
3.
Plug the display cable into your card; then turn on the
computer and monitor.
2)
GV-N40128TE/GV-N4064T
RCA
S-Video
VGA Monitor Connector
(15 pins)
VGA Monitor Connector
(15 pins)
S-Video
RCA
NTSC / PAL TV
Projector
Analog LCD Monitor
Analog Monitor
AV Output
S-Video Output
or
NTSC / PAL TV
AV Output
1.
Locate the
AGP slot. If
necessary, re-
move the metal
cover from this
slot; then align
your graphics
card with the AGP slot, and press it in firmly
until the card is fully seated.