Gigabyte GV-R80P256D Manual - Page 8

English 4. Locate the AGP slot. If necessary, remove the metal coverfromthis slot; then align your graphics card with theAGP slot, and press it in firmly until the card is fully eated. 5. Replacethe screwto fastenthe cardinplace, and replace the computer cover. After installation, please connect the power cable to your GV-R80P256D/ GV-R80P256V graphics card, or system will not boot. 6. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To VG A Monitor To Flat P anel Display To TV or V CR You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. GV-R80P256D(V) Graphics Accelerator - 8 -