Gigabyte GV-R92128D Manual - Page 9
turn on the computer and monitor. If your
View all Gigabyte GV-R92128D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully eated. GV-R9200 series graphics card AGP slot 5. Replace the screw to fasten the card in place, and replace the computer cover. 6. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To Flat Panel Display To VGA Monitor 7 Pin for TV-out only 9 Pin for VIVO only You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. - 9 - Hardware Installation