Gigabyte GV-R96P256D Manual - Page 9
Replace the screw to fasten the card - drivers
View all Gigabyte GV-R96P256D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully seated. 5. Replace the screw to fasten the card in place, and replace the computer cover. 6. Plug the display cable into your graphics card; then turn on the computer and monitor. To Flat Panel Display To VGA Monitor 7-Pin for TV-out only You are now ready to proceed with the installation of the graphics card drivers. Please refer to next chapter for detailed instructions. - 7 - Hardware Installation
Hardware Installation
- 7 -
English
4.
Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully
seated.
5.
Replace the screw to fasten the card in
place, and replace the computer cover.
6.
Plug the display cable into your graphics
card; then turn on the computer and
monitor.
You are now ready to proceed with the installation of the graphics card drivers. Please
refer to next chapter for detailed instructions.
To Flat Panel Display
7-Pin for TV-out only
To VGA Monitor