Gigabyte GV-R96X256V Manual - Page 10
turn on the computer and monitor. If your
View all Gigabyte GV-R96X256V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English 4. Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully eated. 5. Replace the screw to fasten the card in place, and replace the computer cover. 6. Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below... To Flat Panel Display To VGA Monitor 9 Pin (VIVO) You are now ready to proceed with the installation of the graphics card driver. For detailed instructions, select your operating system from the list below. GV-R96X256V Graphics Accelerator - 8 -
GV-R96X256V Graphics Accelerator
- 8 -
English
4.
Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully eated.
5.
Replace the screw to fasten the card in
place, and replace the computer cover.
6.
Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
To VGA Monitor
To Flat Panel Display
9 Pin (VIVO)