Gigabyte MVBAYAI Manual
Gigabyte MVBAYAI Manual
 |
View all Gigabyte MVBAYAI manuals
Add to My Manuals
Save this manual to your list of manuals |
Gigabyte MVBAYAI manual content summary:
- Gigabyte MVBAYAI | Manual - Page 1
MVBAYAI Intel® Atom® processor motherboard User's Manual Rev. 1001 - Gigabyte MVBAYAI | Manual - Page 2
is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE - Gigabyte MVBAYAI | Manual - Page 3
Table of Contents Box Contents...4 MVBAYAI Motherboard Layout 5 Block Diagram...8 Chapter 1 Hardware Installation 9 1-1 Installation Precautions 9 1-2 Product Specifications 10 1-3 Installing the Memory 12 1-3-1 Installing a Memory 12 1-4 Back Panel Connectors 13 1-5 Internal Connectors 15 - Gigabyte MVBAYAI | Manual - Page 4
Box Contents Motherboard Driver CD Two SATA cables I/O Shield • The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. • The motherboard image is for reference only. - 4 - - Gigabyte MVBAYAI | Manual - Page 5
MVBAYAI Motherboard Layout 12 3 4 567 8 28 29 30 31 32 27 26 34 41 40 42 39 9 35 36 37 38 10 33 43 11 12 14 13 25 24 16 23 22 19 17 21 20 18 15 - 5 - - Gigabyte MVBAYAI | Manual - Page 6
Item Code 1 AUDIO 2 USB_LAN1 3 USB_LAN2 4 VGA_COM2 5 HDMI 6 KB_MS 7 RUSB1 8 DC_IN 9 ATX_12V 10 JRS6 11 LVDS 12 BKL_CN 13 SODIMM1 14 CPU 15 SODIMM2 16 COM5 17 COM6 18 SATAPW_1 19 M_SATA 20 SATA1 21 F_PANEL 22 LPC 23 F_USB1 24 AT_CN 25 GPIO_CNT 26 MIN_PCIE 27 PCI 28 F_AUDIO 29 SKP_OUT 30 CPU_FAN - Gigabyte MVBAYAI | Manual - Page 7
40 JRS2 41 JRS4 42 JRS1 43 JP2 RS232/RS422/RS485 Select Jumper for COM1 RS232/RS422/RS485 Select Jumper for COM1 RS232/RS422/RS485 Select Jumper for COM1 LVDS Panel GPIO Control jumper - 7 - - Gigabyte MVBAYAI | Manual - Page 8
Block Diagram - 8 - - Gigabyte MVBAYAI | Manual - Page 9
electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, do not remove you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician. - Gigabyte MVBAYAI | Manual - Page 10
ŠŠ L1/L2 cache varies with CPU ŠŠ 2 x SO-DIMM slots support 1.35V DDR3L 1333/1600MHz ŠŠ Support up 16GB ŠŠ Realtek® ALC269 codec ŠŠ High Definition Audio ŠŠ 2 channel ŠŠ 2 x Realtek RTL8111G GbE controllers supports 10/100/1000 Mbps Expansion Slots ŠŠ ŠŠ Onboard ŠŠ Graphics Storage Interface - Gigabyte MVBAYAI | Manual - Page 11
ŠŠ System voltage detection ŠŠ CPU/System temperature detection ŠŠ CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. ŠŠ AMI BIOS Form Factor ŠŠ Mini ITX Form Factor; 170CM x 170CM GIGABYTE reserves - Gigabyte MVBAYAI | Manual - Page 12
1-3 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. • Always turn off the computer and unplug the - Gigabyte MVBAYAI | Manual - Page 13
port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs. USB 2.0 Port The USB port supports the USB 2.0 specification. Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc. Line In Jack (Blue - Gigabyte MVBAYAI | Manual - Page 14
Connection/ Speed LED Activity LED LAN Port Connection/Speed LED: State Orange Green Off Description 1 Gbps data rate 100 Mbps data rate 10 Mbps data rate Activity LED: State Description Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring - Gigabyte MVBAYAI | Manual - Page 15
1-5 Internal Connectors 32 25 26 27 12 98 10 7 1 11 13 5 6 18 29 28 16 17 30 4 24 31 14 23 21 15 22 19 20 1) ATX_12V 2) DC_IN 3) KB_MS 4) BLK_CN 5) COM1 6) JCOM1 7) JRS3 8) JRS2 9) JRS4 10) JRS1 11) COM3 12) JCOM3 13) COM4 14) COM5 15) COM6 16) JP2 17) LVDS 18) JRS6 19) SATA1 20 - Gigabyte MVBAYAI | Manual - Page 16
Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to - Gigabyte MVBAYAI | Manual - Page 17
ATX 1) ATX_12V (2x4 12V Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The - Gigabyte MVBAYAI | Manual - Page 18
3) KB_MS (PS/2 Mouse/Keyboard cable connector) 6 1 Pin No. 1 2 3 4 5 6 Definition PS POWER MCLK MDATA KCLK KDATA GND 4) BLK_CN (LCD Inverter Connector) 42 41 1 5 Pin No. 1 2 3 4 5 Definition VCC BLKCTL ENABKL GND +12V Hardware Installation - 18 - - Gigabyte MVBAYAI | Manual - Page 19
5) COM1 (Serial Port 1 Cable Connector)/JRS3/JRS2/JRS4/JRS1 6) JCOM1 (COM1 Power Select jumper) 7/8/9/10) RS232/RS422/RS485 Select Jumpers for COM1) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer. - Gigabyte MVBAYAI | Manual - Page 20
11/12) COM3/COM4 (Serial Port 3/4 Cable Connectors) COM4 COM3 COM3/COM4 COM3 Pin No. 1 2 3 4 5 6 7 8 9 10 1 2 Definition NRXD3NDCD3NDTR3NTXD3NDSR3GND NCTS3NRTS3NC RI3-/1.5V/12V 9 10 COM4 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition NRXD4NDCD4NDTR4NTXD4NDSR4GND NCTS4NRTS4NC NRI4- 13) JCOM3 (5V/12V/ - Gigabyte MVBAYAI | Manual - Page 21
14/15) COM5/COM6 (Serial Port 5/6 Cable Connectors) COM5/COM6 9 10 COM5 COM6 1 COM5 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition NRXD5NDCD5NDTR5NTXD5NDSR5GND NCTS5NRTS5NC NRI5- 2 COM6 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition NRXD6NDCD6NDTR6NTXD6NDSR6GND NCTS6NRTS6NC NRI6- 16) JP2 (LVDS Panel - Gigabyte MVBAYAI | Manual - Page 22
17) LVDS (LVDS Connector) LVDS stands for Low-voltage differential signaling, which uses high-speed analog circuit techniques to provide multigigabit data transfers on copper interconnects and is a generic interface standard for high-speed data transmission. 1 39 2 40 Pin No. 1 2 3 4 5 6 7 8 9 - Gigabyte MVBAYAI | Manual - Page 23
DEBUG PORT 19) SATA1 (SATA 3Gb/s Connector) The SATA connectors conform to SATA 3Gb/s standard and are compatible with 1.5Gb/s standard. Each SATA connector supports a single SATA device. 1 9 Pin No. 1 2 3 4 5 6 7 8 9 Definition GND TXP TXN GND RXN RXP GND VCC GND - 23 - Hardware Installation - Gigabyte MVBAYAI | Manual - Page 24
20) SATAPW_1 (SATA HDD Power Connector) 4 1 Pin No. 1 2 3 4 Definition +12V GND GND VCC 21) LPC (Low Pin Connector) 13 14 12 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Definition LAD0 +3.3V LAD1 -PLTRST2_N LAD2 -LFRAME LAD3 LPC25 SERIRQ_N GND +5V GND +5V GND Hardware Installation - 24 - - Gigabyte MVBAYAI | Manual - Page 25
22) F_PANEL (Front Panel Header) Connect the power switch, reset switch, speaker, and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. 2 10 1 9 Pin No. 1 2 3 4 5 6 7 8 9 10 Signal - Gigabyte MVBAYAI | Manual - Page 26
23) F_USB1 (USB Header) The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer. Pin No. Definition 1 Power (5V) 21 2 Power (5V) 3 -FUSBP2 4 -FUSBP3 5 + - Gigabyte MVBAYAI | Manual - Page 27
25) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this header. Make sure the wire - Gigabyte MVBAYAI | Manual - Page 28
design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat dissipation, it is recommended that - Gigabyte MVBAYAI | Manual - Page 29
30) CLR_CMOS (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a - Gigabyte MVBAYAI | Manual - Page 30
Setup program, press the key during the POST when the power is turned on. • BIOS flashing is potentially risky, if you do not encounter problems of using the current BIOS version, it is recommended that you don't flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS - Gigabyte MVBAYAI | Manual - Page 31
Main This setup page includes all the items in standard compatible BIOS Advanced This setup page includes all the items of AMI BIOS special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters.) Chipset Northbridge and Southbridge - Gigabyte MVBAYAI | Manual - Page 32
2-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom - Gigabyte MVBAYAI | Manual - Page 33
BIOS Information Project Name Display name of the project. BIOS Version Display version number of the BIOS. BIOS Build Date and Time Displays the date and time when the BIOS setup utility was created. LAN1/2 MAC Address Displays the LAN1 and LAN2 MAC address information. Memory Information Total - Gigabyte MVBAYAI | Manual - Page 34
2-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. BIOS Setup - 34 - - Gigabyte MVBAYAI | Manual - Page 35
2-2-1 Hardware Monitor Press Enter to view the Hardware Monitor screen which displays a real-time record of the CPU/system temperature, and fan speed, Items on this window are non-configurable. PC Health Status CPU/System SMART FAN Function Enable CPU/System Fan Stop Warning function. Option - Gigabyte MVBAYAI | Manual - Page 36
2-2-2 S5 RTC Wake Settings Wake system from S5 Enable or disable System wake on alarm event. When enabled, System will wake on the hr:min:sec specified. Default setting is Disabled. Wake up hour(Note) Press and to define the wake up hour. Wake up minute(Note) Press and to define the - Gigabyte MVBAYAI | Manual - Page 37
2-2-3 CPU Configuration CPU Information Press [Enter] to view the installed CPUinformation. Intel Virtualization Technology Select whether to enable the Intel Virtualization Technology function. VT allows a single platform to run multiple operating systems in independent partitions. Options - Gigabyte MVBAYAI | Manual - Page 38
2-2-3-1 CPU Information CPU Type/Signature/Processor Cores/64-bit/Intel HT Technology/ Intel VT-x Technology Displays the technical specifications for the installed processor. Cache Information L1 Data Cache / L1 Code Cache / L2 Cache / L3 Cache Displays the technical specifications for the - Gigabyte MVBAYAI | Manual - Page 39
2-2-4 SATA Configuration SATA Mode Selection Select the on chip SATA type. IDE Mode: When set to IDE, the SATA controller disables its AHCI function and runs in the IDE emulation mode. AHCI Mode: When set to AHCI, the SATA controller enables its AHCI functionality. Options available: IDE/AHCI. - Gigabyte MVBAYAI | Manual - Page 40
the Launch CSM is set to Enabled. • If the Launch CSM is set to Disabled, the following five items will not be able to support Legacy mode. Network stack Enable/Disable UEFI network stack. Options available: Enabled/DIsabled. Default setting is Disabled. Video Controls the execution UEFI and Legacy - Gigabyte MVBAYAI | Manual - Page 41
2-2-6 SIO Configuration - 41 - BIOS Setup - Gigabyte MVBAYAI | Manual - Page 42
BIOS Setup - 42 - - Gigabyte MVBAYAI | Manual - Page 43
- 43 - BIOS Setup - Gigabyte MVBAYAI | Manual - Page 44
AMI SIO Driver Version Display the AMI SIO driver version information. Super IO Chip Logical Device(s) Configuration [*Active*] Serial Port 1/2/3/4/5/6 Press [Enter] for confuguration of advanced items. Serial Port 1 Configuration Use This Device When enabled allows you to configure the serial port - Gigabyte MVBAYAI | Manual - Page 45
configuration for the serial port. Options available: Enabled/Disabled. Default setting is Enabled. Logical Device Settings Display the Serial Port 3 base I/O addressand IRQ. Serial Port 4 Configuration Use This Device When enabled allows you to configure the serial port 4 settings. When set to - Gigabyte MVBAYAI | Manual - Page 46
power is removed. Options available: Power On/Power Off/Last State. Default setting is Power Off. Erp Mode Enable/Disable Erp support function. Options available: Enabled/Disabled. Default setting is Disabled. Backlight brightness Configure the backlight brightness. Options available: 5%/25%/50%/75 - Gigabyte MVBAYAI | Manual - Page 47
2-4 Security Menu The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that you can set: • Adminstrator Password Entering this password will allow the user to access and change all settings in the - Gigabyte MVBAYAI | Manual - Page 48
2-4-1 Secure Boot menu System Mode Display the System Mode state. Secure Boot Display the System Mode State. Secure Boot Secure Boot requires all the applications that are running during the booting process to be pre-signed with valid digital certificates. This way, the system knows all the files - Gigabyte MVBAYAI | Manual - Page 49
2-4-1-1 Key Management Key Management This item appears only when the Secure Boot Mode is set to Custom. Default Key Provisioning Force the system to Setup Mode. This will clear all Secure Boot Variables such as Platform Key (PK), Key-exchange Key (KEK), Authorized Signature Database (db), and - Gigabyte MVBAYAI | Manual - Page 50
Set new KEK Press [Enter] to configure a new KEK. Append Var to KEK Press [Enter] to load additional KEK from a storage devices for an additional db and dbx management. Authorized Signature Database (DB) Display the status of Authorized Signature Database. Delete DB Press [Enter] to delete the db - Gigabyte MVBAYAI | Manual - Page 51
2-5 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the drive(s) specified is not bootable. Boot Configuration Quiet Boot Enables or disables showing the logo during POST. Options available: Enabled/Disabled. Default - Gigabyte MVBAYAI | Manual - Page 52
2-6 Save & Exit Menu The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press Enter. Save Changes and Reset Saves changes made and close the BIOS setup. Options available: Yes/No. Discard Changes and Reset Discards changes made and close
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
 |
 |
MVBAYAI
Intel
®
Atom
®
processor motherboard
User's Manual
Rev. 1001