Gigabyte Sumo 4112 User Manual - Page 8

4. Installation Instruction Please follow the reference sections in order for installation. 4-1 Installation of Power Supply To facilitate the installation, it is recommended to set the chassis upright on the table. Required parts: power supply securing screws x 4 4-1.1 Remove side panel (see step 1-3.1on page 6). Place the power supply unit into the case. 4-1.2 Place the power supply unit into the case. 4-1.3 Secure the power supply with the 4 securing screws. 4-1.4 When using large power supply unit, please disassemble the cross bar by loosening screws. Fasten the screws to secure the cross bar after the power supply installed. 4-1.1 4-1.2 4-1.3 4-1.4 4-2 Installation of Motherboard This chassis supports CEB / ATX / Micro ATX motherboards. Please confirm the dimensions and fixing points of the motherboard prior to installation. Required parts: Copper stand offs, Motherboard screws 4-2.1 According to the motherboard's specifications, select the proper screw points. Screw in the copper stand offs into the corresponding points on the motherboard. 4-2.2 Change the motherboard I/O bracket on the rear panel (supplied by the motherboard manufacturer). 4-2.3 Secure the motherboard with the motherboard screws (refer to your motherboard manual to check what type of motherboard you have). Motherboard Code on tray Securing screw Copper stand off CEB E1-E8 8 8 ATX A1-A9 9 9 Micro ATX M1-M9 9 9 4-2.1 4-2.2 4-2.3 4-3 Installation of Add-On card This chassis supports tool-free installation of add-on cards, e.g. graphics cards, sound cards, and etc. Required Tools: None 4-3.1 Unlock the PCI slot clamp. 4-3.2 Remove the internally attached PCI slot blanking plate. 4-3.3 Insert the add-on card into the expansion slot with care. 4-3.4 Secure the PCI clamp. 4-3.1 4-3.2 4-3.3 4-3.4 08 English