Gigabyte T1005M Manual - Page 19

Installing T1000/T1005 Device Drivers

Page 19 highlights

Replacing the Battery The battery will gradually weaken over time. We recommend that you replace your battery when you notice a significant decrease of battery capacity. To change the battery pack, follow the steps below: 1. Turn off the computer. 2. Close the lid and flip the computer over. 3. Slide the battery latch. Continue to hold it until the battery is removed. 4. Make sure the replacement battery is properly oriented before inserting it into the battery compartment. T1000 / T1005 SERIES USER'S MANUAL 1.11 Installing T1000/T1005 Device Drivers If your T1000/T1005 netbook already has an operating system installed, it is best to install all necessary device drivers in order for the hardware to properly function. Before installing drivers, check with your vendors to see if they have already installed all the drivers with the operating system, if not, please place the Utility Driver CD into external CD RW/DVD RW Drive. An Auto Run installation screen will appear. 9 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

English
T1000 / T1005 SERIES USER’S MANUAL
9
Replacing the Battery
The battery will gradually weaken over time. We recommend that
you replace your battery when you notice a significant decrease of
battery capacity.
To change the battery pack, follow the steps below:
1. Turn off the computer.
2. Close the lid and flip the computer over.
3. Slide the battery latch. Continue to hold it until the battery is
removed.
4. Make sure the replacement battery is properly oriented before
inserting it into the battery compartment.
1.11
Installing T1000/T1005 Device Drivers
If your T1000/T1005 netbook already has an operating system
installed, it is best to install all necessary device drivers in order for
the hardware to properly function.
Before installing drivers, check with your vendors to see if they have
already installed all the drivers with the operating system, if not,
please place the Utility Driver CD into external CD RW/DVD RW
Drive. An Auto Run installation screen will appear.