Gigabyte T1005M Manual - Page 30

English 4.1 Troubleshooting Warning: Under the condition that you can't handle trouble, please refer to your dealer to get professional service. AC Adapter Trouble Solution Make sure the AC adapter is well connected to the power source and T1000/T1005. 20 No power supplies to T1000/T1005 Check the cable and plug to make sure they are OK. If they are broken, please contact your local dealer ASAP. Battery Pack Trouble Solution No power supplies to T1000/T1005 The remaining power in battery pack may be not enough to power on the machine. Connect AC adapter to recharge it. Check temperature of battery pack's surface. Battery pack can't be recharged if its tempera- ture is too high or too low. Recharged it after its temperature is the same with the normal Can't be recharged environment one. after connecting AC adapter If battery pack is fully discharged, it won't be recharged at once. Please wait for some minutes. If the power indicators of battery pack are always not lit up, its life may be over. Please contact your dealer to buy another one. Battery life depends on using condition of T1000/T1005. You can change the settings in Power Manager of OS to save power. Battery pack can't exert its full capacity if it Battery life is not as works when not fully recharged frequently. long as it should be Power T1000/T1005 by battery pack until its power drops to a critically low level and the machine emits a high-pitched beep or displays a warning message; after that, recharge battery pack to make battery pack work longer. WARNING: Please pay attention to the following information regarding the battery pack: 1.Be sure to recycle the waste batteries. 2.Do not place the batteries near high-temperature locations, fire source or in burning fire as this may cause the batteries to explode 3.Do not assemble/disassemble /modify the batteries without authorization. 4.Use the battery pack provided by the original manufacturer only. Batteries other than those supplied by the original manufacturer may damage the device. Keyboard Trouble Press character keys but number displayed instead of character Confusing display Solution Check if Num Lock is activated. Make sure there is no software to configure the keyboard.