Haier 3U19FS1ERA Service Manual - Page 64
Insert the hinges on the bottom of the intake grill into the holes in the base assembly. Then mount
View all Haier 3U19FS1ERA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
2. Mount the cover plate.(Left) (1) Join the cover plate (left) and mount with screws. Fig. 33 >_]]VbTZR\ _^UZdZ_^Vb 3. Mount the intake grill. (1) Cut the right side of the intake grill. This is only when the pipe exits from the right side Fig. 34 (2) Insert the hinges on the bottom of the intake grill into the holes in the base assembly. Then mount the arms to the three areas on the top of the intake grill. Fig. 35 -63-
(2) Insert the hinges on the bottom of the intake grill into the holes in the base assembly. Then mount the arms to
the three areas on the top of the intake grill.
Fig. 35
Fig. 34
(1) Cut the right side of the intake grill. This is only when the pipe exits from the right side
3. Mount the intake grill.
(1) Join the cover plate (left) and mount with screws.
Fig. 33
2. Mount the cover plate.(Left)
±²³³´µ¶·¸¹ º·µ ±²»¼·½·²»´µ
-63-