Haier CPRD12XC7 User Manual - Page 8

English Assembly and Installation Assembly Instruction A. Connect exhaust hose to the back of the unit. Extend hose to desired length and connect with window kit. USING EXHAUST DUCT SET Mr Outlet Nozzle Exhaust Duct Hose Elel3Uel Duct Adapter Hon Nort• • Exhaust duct 1. Insert ends of Exhaust hose into air outlet nozzle and Exhaust duct "A" by twisting until it stops. 2. Fix the Exhaust duct "A" to the exhaust outlet on the rear of the unit. This is achieved by sliding the appropriate connector downward over the exhaust outlet ensuring that the lugs on the outlet are engaged with the grooves on the connector. 3. The exhaust hose is snap-fit to the unit. To take it off, turn it clockwise and remove. Note: Air outlet hose should be mounted at right side (see fig. 1) 4. Extend the Exhaust hose and close the Window as far as possible, trapping the air outlet nozzle. B. Repeat same steps for the air intake hose. USING WINDOW PANEL KIT 1. Air Inlet Hose - 1 set 2. Air Outlet Hose - 1 set 0 3. Window Exhaust Adapter - 2 pieces 4. Window/Patio Door Slider Kit - 1 set Window Kit Installation From 20150.5cm)up to 461116.8cm) C4.) rl 4-0 0 0 6