Haier DW12-TFE2WH User Manual - Page 18

Fault finding Resolving minor problems yourself Experience has shown that you can resolve most problems that rise during normal daily usage yourself, without having to call out a service engineer.Not only does this save costs,but it also means that the appliance is available for use again that much sooner. The following list of common occurrences and their remedies should help you identify the causes of most problems. Problems... ...when the appliance is switched on Appliance does not start up Fault with fuse in mains electricity supply. Plug not inserted in wall socket. Appliance door not closed properly. Programme has not been choosed. Water tap not turned on. Blocked strainer in water intake hose. - The strainer is situated in the Aquastop or supply-hose connection. Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage as well as danger to the user. ...with the appliance itself When the alarm sounds in a series of 2 beeps, pause, 2 beeps, pause ... the water is turned on and the hose is connected properly; the water supply to the house is on and has sufficient pressure; the water supply hose is crimped or bent; the filter for the water supply hose is clogged. the drain hose is too low. When the alarm sounds in a series of 3 beeps, pause, 3 beeps, pause ... the drain hose is crimped or bent. the drain hose is too high. When the alarm sounds in a series of 6 beeps, pause, 6 beeps, pause ... the drain hose is too low. When the "END" indicator is on, at the moment, the alarm sounds in a series of 10 beeps, pause, 10 beeps, pause ... the door is not properly closed. 16