Haier DW15-PFE User Manual - Page 30

Drain, connection, Electrical, Connection

Get Haier DW15-PFE PDF manuals and user guides View all Haier DW15-PFE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Drain hose connection Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. If necessary, fit a syphon trap (U-bend) with a connecting piece for the drain hose (fig.B). The free end of the hose must be at a height between 40 and 100 cm and must not be immersed in water. 0 O O 0 O fig.B 7\ Attention: The connecting piece for syphon trap (U-bend) must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain. Electrical Connection After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is correct for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the whole cable, rather than using adaptors or the like as they could cause overheating and burns. i\ Caution: ' The dishwasher plug must be accessible even when the appliance is installed as a built-in unit so that maintenance can be done safely. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Drain
hose
connection
Insert
the
drain
hose
into
a
drain
pipe
with
a
minimum
diameter
of
4cm,
or
let
it
run
into
the
sink,
making
sure
to
avoid
bending
or
crimping
it.
If
necessary,
fit
a
syphon
trap
(U
-bend)
with
a
connecting
piece
for
the
drain
hose
(fig.B).
The
free
end
of
the
hose
must
be
at
a
height
between
40
and
100
cm
and
must
not
be
immersed
in
water.
0
0
O
O
O
fig.B
Electrical
Connection
After
making
sure
that
the
voltage
and
frequency
values
for
the
current
in
the
home
correspond
to
those
on
the
rating
plate
(located
on
the
stainless
steel
inner
door
of
the
appliance)
and
that
the
electrical
system
is
correct
for
the
maximum
voltage
on
the
rating
plate,
insert
the
plug
into
an
electrical
socket
which
is
earthed
properly
(the
earthing
of
the
appliance
is
a
safety
requirement
mandated
by
law).
If
the
electrical
socket
to
which
the
appliance
must
be
connected
is
not
appropriate
for
the
plug,
replace
the
whole
cable,
rather
than
using
adaptors
or
the
like
as
they
could
cause
overheating
and
burns.
5