Haier DW15-PFE2 User Manual - Page 30
Positioning, appliance, Levelling, water, connection, Flooding, protection, models
View all Haier DW15-PFE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installation Positioning the appliance Positioning the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation. Levelling the appliance Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°. If the appliance is level, it will help ensure proper performance. Cold water connection Connect the water supply hose to a threaded 3/4 (gas) connector, making sure that it is fastened tightly in place (see fig.A). Some models are fitted with an 'Aquastop" water supply hose (see fig.B) in which the small filter is already housed in the fig.A threaded end. If the water pipes are new or have not been used for an ex- tended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance. A Warning The appliance is to be connected to the fig.B water mains using new hose-sets and that old hose-sets should not be reused. Anti-Flooding protection (for some models) The dishwasher is equipped with a system that stops the supply of water in the event of a problem with the water supply hose, or leaks within the unit, in order to prevent damage to your home. If for any reason the box containing the electrical components happens to get damaged, remove the plug for the appliance from the socket immediately. In order to guarantee that the anti-flooding feature operates properly, the "A' box with water supply hose must be attached to the water supply tap as shown in fig.B. No other type of connection is acceptable. The water supply hose must not, under any circumstances, be cut, as it contains electrical parts which are live. If the length of the hose is not adequate to make a proper connection, the hose must be replaced with one which is long enough. This hose is available upon request from specialised retailers and service center. 4 - 2 2 m: N O (P Q R nn-rn naxwn vnn .J rrinriano `roan .K °inn Ala lonn .M "nima -uonn" ann .N "nplan -mina -mom)" ann .0 mity-19no .P nnnr 113 .Q nnov pun .R own now .A n'n Ann .B 093 nnl ann 713.RVJT3 1100 .D .E '311'3 IT OMOVJ .F -p-in °mow .G naxn arm .H DM 110'33 01110VJ .11 (Aquastop) Din no.33 °mow .12 on.mni7 pin /4'1 '3 inyn ontnx 1711 IN -mann oa `71) v.pinn , `mo llrnn Tama -mann nx .n`pri nmo. n`noo `MD nr l'W3017 1A3)317 vuon -mann L7v) r13133 naliwn .o.nnop`mi onlinvin o.-vvian 11Y1 nalmnn 1/13.317 ,o-rxn nixna `NI nao.on `73) Nip* nvown .n3133 Tel -wrnn 3111 DY Ix n.nipnn nyvinn ,-mann limn ni-rix 9013 1119317 .nmo. n`noo 30