Haier ESA415N Use and Care Manual - Page 16

Install The Cabinet In The Window

Page 16 highlights

ENGLISH PREPARING THE AIR CONDITIONER cont.: ESA415 / ESA418 1. Measure the width of the window opening. (See Fig.8) 2. Mark the center line on the inside of the windowsill with a pencil. (See Fig.9) WIDTH OF WINDOW OPENING Fig. 8 CENTER LINE Fig. 9 HEIGHT LENGTH WIDTH WIDTH WIDTH CENTER NOTES AND WARNINGS: • Be sure your air conditioner does not fall out of the opening during installation or removal. • A grounded electrical outlet must be within 4 ft. (122 cm) of where the power supply cord exits the air conditioner. • Do not block the air discharge or air intake areas on the front panel. • Do not block the louvers on the outside of the air conditioner. INSTALL THE CABINET IN THE WINDOW (See Fig.10) FOR MODELS: ESA415M ESA418M 1. C enter the cabinet in the windowsill. Make sure to place the cabinet so that it is resting on the windowsill with a ¼" to ½" downward tilt towards the outside (See Fig. 10). Lower the window sash behind the front flange of the top channel to hold the unit in place. The bottom channel must rest behind the window sill. NOTE: The appearance of your model may differ from the one shown. Fig. 10 Bottom Channel Window Sill HOW TO INSTALL PAGE 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

ENGLISH
HOW TO INSTALL
PAGE 13
PREPARING THE AIR CONDITIONER cont.: ESA415 / ESA418
1. Measure the width of the window opening.
(See Fig.8)
2. Mark the center line on the inside of the windowsill with a pencil.
(See Fig.9)
INSTALL THE CABINET IN THE WINDOW
(See Fig.10)
FOR MODELS:
ESA415M
ESA418M
1. Center the cabinet in the windowsill.
Make sure to place the cabinet so that it is resting on the
windowsill with a ¼" to ½" downward tilt towards the outside
(See Fig. 10)
. Lower the window
sash behind the front flange of the top channel to hold the unit in place.
The bottom channel
must rest behind the window sill.
NOTE:
The appearance of your model may differ from the one shown.
NOTES AND WARNINGS:
• Be sure your air conditioner does not fall out of the opening during installation or removal.
• A grounded electrical outlet must be within 4 ft. (122 cm) of where the power supply cord
exits the air conditioner.
• Do not block the air discharge or air intake areas on the front panel.
• Do not block the louvers on the outside of the air conditioner.
WIDTH
CENTER
WIDTH OF
WINDOW OPENING
CENTER LINE
Fig. 8
Fig. 9
Fig. 10
Bottom Channel
Window Sill