Haier ESA415N Use and Care Manual - Page 20
English, Notes And Warnings
View all Haier ESA415N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH PREPARING THE AIR CONDITIONER: ESA424 1. Measure the width of the window opening. (See Fig.21) 2. Mark the center line on the inside of the windowsill with a pencil. (See Fig.22) WIDTH OF WINDOW OPENING Fig. 21 CENTER LINE Fig. 22 HEIGHT LENGTH WIDTH WIDTH WIDTH CENTER NOTES AND WARNINGS: • Be sure your air conditioner does not fall out of the opening during installation or removal. • A grounded electrical outlet within 4 ft. (122 cm) of where the power supply cord exits the air conditioner. • Do not block the air discharge or air intake areas on the front panel. • Do not block the louvers on the outside of the air conditioner. INSTALL THE CABINET IN THE WINDOW FOR MODEL ESA424K (See Fig.23) 1. C enter the cabinet in the windowsill. Make sure to place the unit so that it is resting on the windowsill with a ¼" to ½" downward tilt towards the outside. Lower the window sash behind the front flange of the top channel to hold the unit in place. The bottom channel must rest behind the window sill. (See Fig.23) NOTE: The appearance of your model may differ from the one shown. Fig. 23 Bottom Channel Window Sill HOW TO INSTALL PAGE 17