Haier ESD400 User Manual - Page 20

CANCELLING A CYCLE, To stop the drain, Changing a Cycle or Setting - dishwasher cycle setting lights

Page 20 highlights

English CANCELLING A CYCLE 1. Carefully open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door to access the control panel. 2. Press the key 3. Close the door. The dishwasher starts a 2-minute drain ( if needed ). Let the dishwasher drain completely. To stop the drain You can press Start/Reset again to stop the drain. Remember to drain the dishwasher before starting a new cycle. Changing a Cycle or Setting While a cycle is running 1. Open the door. 2. Press the key shown below for 1 second. Start/Reset light goes off. 3. Select a new cycle and/or option. 4. Press Start/Reset button as shown below. 5. Start/Reset glows. 6. Check the detergent dispensers. They must be filled properly for the new cycle. 7. Close the door. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

English
19
CANCELLING A CYCLE
1. Carefully open the door slightly to stop the cycle. Wait for the spraying action
to stop before opening the door to access the control panel.
2. Press the key
3. Close the door. The dishwasher starts a 2-minute drain ( if needed ). Let the
dishwasher drain completely.
To stop the drain
You can press
Start/Reset again to stop the drain.
Remember to drain the dishwasher before starting a new cycle.
Changing a Cycle or Setting
While a cycle is running
1. Open the door.
2. Press the key shown below for 1 second.
Start/Reset light goes off.
3. Select a new cycle and/or option.
4. Press Start/Reset button as shown below.
5. Start/Reset glows.
6. Check the detergent dispensers. They must be filled properly for the new cycle.
7. Close the door.