Haier ESD400 User Manual - Page 23

English To delay the start 1. Close the door. 2. Repeatedly press display. until you see the desired hours of delay in the select a new number of delay hours. 3. Select a wash cycle and options. NOTE: To cancel the delay and cycle, press Cancel. To Cancel the delay and start the cycle immediately, press Delay Start until no hours show in the display. USING THE PLATE WARMER Use the Plate Warmer option to warm serving dishes or dinner plates. Note: Do not use the option with cycles. 1. Open the door 2. Press , Plate Warmer glows. 3. Allow 8 minutes to heat the dishware. CYCLES STATUS INDICATORS Follow the progress of your dishwasher with the Cycle Status indicators. Water Heated Water Heated glows only when the cycle pauses to heat water to a set temperature. Washing or rinsing continues as water is heated. Once water reaches the set temperature, the light goes off and the cycle resumes. Washing Displayed during prewash and main wash periods. Turbidity Sensor Sensor glows during the sensing part of the cycle. Your dishwasher sense soil level at the end of the Pre-Wash. Washing continues while Sensing occurs. Rinsing Displayed during rinse periods. 22