Haier HB21FC45NS User Manual - Page 9

English 6) Remove the top hinges (4 screws on each side) and lift off the doors. Remove the middle hinges (3 screws) if necessary. [Illustration 3] Water Line A Connector Water Line B Screw B Water Line Cover Screw A Black Locking Clips [Illustration 4] Electrical Conectors Hinge Screws Water Line A How to Reconnect the Water Line (Only applicable to HB21FC75*) 1) Reinstall the cabinet side tubing (Water Line A, Illustration3) to the connector by firmly pushing the tubing into the union as far as it will go. Follow the color mark on the tube as seen in Illustration 1. Do not depress the end of the union when inserting the tube. Replace the black locking clip. 2) Repeat at the back panel of the union (Water Line B), again making sure that the tubing is inserted as far as it will go. Follow the color mark on the tube. Replace the black locking clip. WARNING: Be careful not to bend or distort the tubing. Also check to ensure there are no foreign objects in the connector, union, or tubes. DiscoDDnieissccctooenndeetcchtteeeddcatthhbeelec,ccaarbbellewe,,cocrrueetwwthooeuutet tathhreteheelaianrretth.hDlliinsnece.o.DDnieissccctooenndeetcchtteeedd tthhee Left French Door Removal and Installation waterwwpaaitpteerroppniippetehoeonnbtathhceekbabatactchkkeaatstatthhmeeessataimmmeee,pttiimumlleeo,,puputultlllhooeuutpttitphheeefpprioippmeeffrroomm the catthhbeeincecaat,bbthiinneeentt,,ttthahekeennttthaaekkeedtothhoeer dodofofo.o(roronoflffyf..((PoonBnlFlyySPP2BB1F*FSSa2n21d1**PaaRnndFdSPP2RR5F*F)SS2255**)) 1. First remove the top hinge cover as below. 2. Disconnect the wire cable connector and ground wire from the unit. 3. Remove the middle hinge, if needed. 4. Re-install the door in the reverse order. When lifting the hinge as it separates from the door, be careful it doesn't lean forward and fall, causing bodily harm or damaging the door. 7