Haier HD100-A2939S User Manual - Page 24

11-Troubleshooting EN Troubleshooting without display-codes Problem Possible cause Possible solution Tumble dryer fails to operate. • Poor connection to the power • Check connection to the pow- supply. er supply. • Power failure. • Check the power supply. • No drying program is set. • Set a drying program. • Device has not been switched • Switch on the device. on. • The water tank is full. • Empty the water tank. • The door is not closed properly. • Close the door properly. Tumble dryer fails to operate and the display shows . • The laundry has reached the • Check the program setting is dry level defined by the pro- appropriate or not. gramme. Drying time is too long and the results are not satisfactory • The programme setting is not • Make sure the program is set correct. correctly. • The filter is clogged. • Clean the filter screen. • The evaporator is blocked. • Clean the evaporator. • The tumble dryer is overloaded. • Reduce the amount of laun- dry. • The laundry is too wet. • Spin the laundry completely before drying. • The vent duct is blocked. • Check and clean the vent duct. Remaining time- The remaining time will be adjus- The automatic adjustment is a on the display- ted continuously based upon the normal operation. stops or skips. following factors: • fabric of laundry. • loading weight. • Moisture degree of the laundry. • Ambient temperature. 24