Haier HDV70E1 User Manual - Page 12
Electrical connection, Product specifications
View all Haier HDV70E1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
INSTALLATION INSTRUCTIONS Electrical connection 1 This appliance must be connected to a 220-240V, 50Hz, sinusoidal, 10A electrical supply. 2 Uncoil the power cord, remove and discard the plastic pin cover and plug into a power socket. 3 Connect the appliance to an earthed outlet protected by a fuse of suitable capacity. ■ Check the power cord for damage and make sure it is not squashed or twisted when installing the dryer. ■ Always remove the power cord from the power socket by the plug, not by the cord. IMPORTANT! ■ Do not touch or operate the dryer with wet hands or with bare feet. ■ A damaged power cord must be replaced by a Haier trained and supported service technician. The appliance must not be operated until it is repaired, as there is risk of electric shock. ■ Do not operate this dryer if it has been damaged during transport. Contact your Haier trained and supported service technician. Product specifications Capacity (kg)* DIMENSIONS (mm) Width Depth Height ELECTRICAL Volts Hz Amps (maximum) Rated Power (W) Waterproof degree HDV70E1 7 600 585 830 220-240 50 10 1770 IPX4 * Capacity refers to the maximum dry weight of items the dryer can dry at any one time. Rated capacity is determined by a country's performance standards, so similar dryers may have different capacities for different markets. 11