Haier HFC9204ACW Instruction Manual - Page 11

a a Caster Lock 3. Orient each caster so that the hole in the caster mounting plate will align with the hole located in each corner of the cabinet bottom. NOTES: • Make sure the casters with locks are installed on the front of the freezer. • Freezer models with 6 casters - Install a caster to each of the four corners, and also install a caster in the center front and center back of the freezer. 4. Slide each caster into the caster brackets until the holes align. NOTES: • Each caster will slide into the corner brackets from a different direction. • It may be necessary to lift the bottom of the freezer slightly to insert the rear casters into their brackets. d c ab a Caster b Hole c Freezer Bottom d Brackets 5. Using one screw per caster, fasten the caster to the freezer bottom. Repeat for the remaining casters. 6. Using the screwdriver (provided), completely tighten the screws. 7. Using two or more people, gently lift the freezer to an upright position. 8. Move the freezer to its final location, and then lock the casters (step on each front caster lock) to keep the freezer from rolling. 9