Haier HFC9204ACW Instruction Manual - Page 9

Electrical Requirements

Get Haier HFC9204ACW PDF manuals and user guides View all Haier HFC9204ACW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Recommended Clearances: 4" Do Not (10.2 cm) BlockTop 4" (10.2 cm) 4" (10.2 cm) • Your freezer is designed for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). • It is recommended that you do not install the freezer in direct sunlight or near a heat source e.g. radiators, baseboard heaters, cooking appliances etc. • Place the freezer on a hard, even floor that is strong enough to support it fully loaded. Any floor unevenness should be corrected before placing the freezer. ELECTRICAL REQUIREMENTS WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the ground prong from the power cord plug. Do not use an adapter. Do not use an extension cord. Failure to do so can result in death, re or electrical shock. Before you move your freezer to a location, it is important to make sure you have the proper electrical connection. Recommended Grounding Method A 115 Volt, 60 Hz., AC only, 15-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your freezer be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
7
Recommended Clearances:
4"
(10.2 cm)
4"
(10.2 cm)
Do Not
BlockTop
4"
(10.2 cm)
•
Your freezer is designed for use in a location where the temperature ranges from
a minimum of 55°F (13°C) to a maximum of 110°F (43°C).
•
It is recommended that you do not install the freezer in direct sunlight or near a
heat source e.g. radiators, baseboard heaters, cooking appliances etc.
•
Place the freezer on a hard, even floor that is strong enough to support it fully
loaded. Any floor unevenness should be corrected before placing the freezer.
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
Before you move your freezer to a location, it is important to make sure you have
the proper electrical connection.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only, 15-amp fused, grounded electrical supply is required. It
is recommended that a separate circuit serving only your freezer be provided. Use
an outlet that cannot be turned off by a switch. Do not use an extension cord.