Haier HFC9204ACW Instruction Manual - Page 12
Step 3 - Install Handle, Step 3 - Complete The Installation
View all Haier HFC9204ACW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
STEP 3 - INSTALL HANDLE 1. Position the handle on the front of the lid so that the flat side is up and the notched side is down. 2. Using the four handle screws (provided), fasten the handle to the front edge of the freezer lid. a a Handle Screws 3. Insert one end of the handle cover into the handle holder. 4. Insert the other end of handle cover into the handle holder, and then press the cover into the handle holder. STEP 3 - COMPLETE THE INSTALLATION IMPORTANT: If the freezer has been in a horizontal position for any period of time, wait 24 hours before plugging in the freezer to allow the refrigerant to settle. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the ground prong from the power cord plug. Do not use an adapter. Do not use an extension cord. Failure to do so can result in death, re or electrical shock. 1. Plug into a grounded 3 prong outlet. 2. Using a carpenter's level, make sure the freezer is level from front to back, and from side to side. Shim if necessary. 10