Haier HL22XSLW2a User Manual - Page 14

Operation B Press VOL+/ ENTER button to enter the menu and CH+/- button to go up and down to select the desired option. C Press VOL+/ ENTER button to confirm and VOL+/- button increase and decrease the level to adjust the selected option to your preference. D Repeat step 2 and step 3 until desired audio quality has been achieved. Function Y Tuner Mode:Press VOL+/ENTER button to select Antenna or Cable. Y Channel Scan: Press VOL+/ENTER button to start to scan, press EXIT to cancel. Video Audio Channel Function Lock Channel Scan Status: Scanning... Analog Channels: 4 Digital Channels: 3 Antenna 40% EXIT Cancel All channels now available will be automatically preset in order .After the search has finished, the first program number will display on the screen. This search automatically adds only the active channels in your area to the TV's memory. It deletes any channels on which there is no broadcast or a poor signal. The channels found are automatically saved. Y Channel Skip:Press VOL+/ENTER button to enter the submenu, then press CH+/- button to select the channel number (eg.2) and press ENTER to confirm, a mark will be display in the pane as follows and this channel will be skipped next time you press CH+/- button but you can press digits button to select the channel. If you want to resume the channel, press ENTER button again. Video Audio Channel Function Lock 2 Analog 3 Analog 4 Analog 5 Analog 5-1 Digital 6 Analog 7 Analog 8 Analog 9 Analog 10 Analog Channel Skip ENTER Set CH+/VOL+/- Select EXIT Back Y Channel Labels: Allows you to name the channel that is selected. Press VOL+/ENTER button to enter the submenu. Video Channel Index 1 Channel Label Audio Channel Function Lock Channel Label Set CH+/VOL+/- Select EXIT Back  Then press CH+/- button to select Channel Index and VOL+/- button to select the position of the item that you want to change, afterward press INPUT to input the numbers and symbols and ENTER button to confirm. Y Time Shifting Mode: To turn the Time Shifting Mode on or off. A Set the Time Shifting On, then insert the USB drive in the USB input. B Press PLAY/PAUSE to play or pause the program. If you want to stop time shift function, press the STOP button. You can stop the time shift program being played by pressing the STOP button. -00:00:01 7:00 7:30 -00:00:01 7:00 7:30 1x 1.Timeshift time. The time offset to the current time. 2.Playback status: It shows the playback status for timeshift component. EN-13 Haier LED HDTV