Haier HL22XSLW2a User Manual - Page 15

 Play Pause Fast forward Fast reverse 3.Playback speed.1x,2x,4x,8x,16x,32x. 4.Playback position. The playback position is always at the center of the time bar. 5.Time scale, which shows the scales of every half hour. The text would move smoothly as the time go by. And the time scale text could be cut-off if the text is on the boundary. Note R Time Shift function is only available in DTV mode. R The maximum recording duration is determined bduration time can be calculated by the formula. R The timeshift record only supports FAT32 filesystem. R The timeshift record supports more than 4GB recording. That is, the timeshift data is stored in multi-file to resolve the FAT32 4 GB limitations. R The recording buffer is a ring buffer. For ring buffer, if the maximum recording duration is reached, the oldest program would be discarded and keep recording the latest program. R When changing channel or changing input source, the timeshift would stop automatically. R Timeshift record will store the fact of no signal. R Timeshift record will store the video, audio and data service. But because of the limited number of PID filter in hardware, we only support: Video streams: Max 1 stream Audio streams: Max 8 streams CC stream: No limited. R In recording, the data is not guaranteed to be stored in the disk. If the timeshift playback plays a corrupted data block, it would show "Data lost" message to indicate that the current data is not stored correctly Function Menu Options A Press MENU button and CH+/- button until the following menu appears on the screen. Video Audio Channel Function Lock Language OSD Timeout OSD Transparency DPMS Blue Screen DCR Time Setup Closed Caption Default English Short Middle On On On Function CH+/VOL+/- Select EXIT Back Operation B PressVOL+/ ENTER button to enter the menu and CH+/- button to go up and down to select the desired option. C PressVOL+/ ENTER button to confirm and VOL+/- button increase and decrease the level to adjust the selected option to your preference. D Repeat step 2 and step 3 until desired quality has been achieved. Function Y Language:Press VOL+/- button to select language of the OSD. Y OSD Timeout: Press VOL+/- button to select Middle /Short and Long to change thetime of the OSD display. Y OSD Transparency: Press VOL+/- button to select among Low/High and Middle to change the transparency of the OSD. To select Low, the OSD is opacity. Y DPMS: PC Power Management. To set On, the set will be in standby mode automatically if no signal in 2 minutes; if signal input , the set will be on again automatically. Y Blue Screen: Press VOL+/- button to select On, the screen will be in blue after 3 seconds if there is no signal. Y DCR: Press VOL+/- button to select On or Off. Y Time Setup: Press VOL+/ ENTER button to enter the submenu. q Time Zone: Press VOL+/- button to select the appropriate time zone. Video Time Zone Date/Time Audio Sleep Timer Off Channel Function Lock Time Setup CH+/VOL+/- Select EXIT Back q Date/Time: Press VOL+/ ENTER button to enter the submenu. Haier LED HDTV EN-14