Haier HL22XSLW2a User Manual - Page 9

Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources. Connecting a VCR To avoid picture noise (interference), leave an adequate distance between the VCR and TV. VIDEO L -AUDIO- R L R ANT IN Installation external equipment's output jacks to the TV input jacks, as shown in the figure. B When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). VIDEO L -AUDIO- R L R AV IN AUDIO OUT AV IN AUDIO OUT VCR Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 A Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). compared to connecting a regular VCR to the Video input. B Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) C Select the input source with using the INPUT button   on the remote control, and then press / button to select the source, press ENTER button to confirm. COMPONENT IN How to use A Select the input source with using the INPUT button on the remote control. B Operate the corresponding external equipment. Refer to external equipment operating guide. Component Setup How to connect Connect the DVD video outputs (COMPONENT) to the Y Pb Pr jacks on the TV and connect the DVD audio outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure. Y Pb Pr L -AUDIO- R External A/V Source Setup How to connect A Connect the audio and video cables from the How to use A Turn on the DVD player, insert a DVD disc. B Use INPUT button on the remote control to select proper input. Haier LED HDTV EN-8