Haier HLC19K2 User Manual - Page 13

Medium, Strong, Off or Low. q Adaptive Luma Control: To adjust changes in the luminance of the picture: Medium, Strong, Off or Low. q Flesh Tone: To adjust the flesh colors: High, Off, Low or Medium. q Blue Stretch: To set Blue Stretch: On and Off. q Game Mode: To set Game Mode: On and Off. q Overscan: This function is active and visible in menu only when the signal is EIA timing (480i /480p /720p /1080i /1080p) in RGB color space in HDMI/DVI input. Audio Menu Options Sound can be adjusted for any input as follows:   A Press MENU button and then / button until the following menu appears on the screen. Video Balance 0 Bass 50 Audio Treble 50 SRS TS XT On Channel Equalizer Off Speaker Off Function SPDIF Type Off AVL Off Lock Audio Only Audio ENTER Adjust CH+/VOL+/- Select EXIT Back B Press / ENTER button to enter the menu and CH+/- button to go up and down to select the desired option.   C Press / ENTER button to confirm and / button increase and decrease the level to adjust the selected option to your preference. D Repeat step 2 and step 3 until desired audio quality has been achieved. Function   Y Balance:Press / button and /ENTER to confirm, then press / to adjust the audio output between left and right speakers.   Y Bass:Press / button and /ENTER button to confirm, then press / to increase or decrease the level of the lower-pitched sounds.   Y Treble:Press / button and /ENTER Operation to confirm, then press/ to increase or decrease the level of the higher-pitched sounds. Y SRS TS XT: To turn the simulated surround sound on or off. Y Equalizer: To adjust the equalizer Off /Rock /Pop /Live /Dance/ Techno /Classic and Soft. Y Speaker: To adjust the speaker on or off. Y SPDIF Type: To adjust the SPDIF output: Off /Dolby Digital and PCM. Y AVL: This will reduces the differences in volume level among broadcasters. Y Audio Only: Press /ENTER button to confirm, the following display will appear on the screen: Press VOL- to select OK, then press OK to confirm. The TV screen will be black and no picture , but the sound is still normal. Press POWER button to exit Audio Only mode OK Cancel You can press POWER button to reveal the picture on the screen. SAP Broadcasts Setup This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one. When having selected SAP button on the remote control, this TV can only receive the signal when the TV station transmits the proper signals. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to mono sound during stereo/SAP broadcasting. Stereo or SAP can be received in a Analog channel. A Use the SAP button to select your desired MTS mode in a analog signal. Each time you press the SAP button, Mono, Stereoor SAP appear. If other languages are available on the digital signal, select them with the SAP button. B Press EXIT button to save and return to TV viewing. Haier LCD HDTV/DVD EN-12