Haier HLC19K2 User Manual - Page 9
Choose Your Connection, Connecting a VCR, External A/V Source Setup, Component Setup
UPC - 688057325187
View all Haier HLC19K2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources. Connecting a VCR To avoid picture noise (interference), leave an adequate distance between the VCR and TV. AV IN R-AUDIO-L VIDEO Installation external equipment's output jacks to the TV input jacks, as shown in the figure. B When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). ATN IN Pr R-AUDIO-L S-VIDEO IN Pb COMPONENT IN Y 1 2 VCR R-AUDIO -L VIDEO AV IN How to use A Select the input source with using the INPUT button on the remote control. B Operate the corresponding external equipment. Refer to external equipment operating guide. Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the TV to the same channel number. Connection Option 2 A Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). If you connect a S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved;compared to connecting a regular VCR to the Video input. B Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) C Select the input source with using the INPUT button on the remote control, and then press / button to select the source, press ENTER button to confirm. &20321(17 ,1 < 3E 3U Component Setup How to connect A Connect the DVD video outputs (COMPONENT) to the Y Pb Pr jacks on the TV and connect the DVD audio outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure. B If your DVD only has an S-VIDEO output jack, connect B this to the S-VIDEO input on the TV, as shown in the figure. 5$8',2/ 69,'(2 ,1 External A/V Source Setup How to connect A Connect the audio and video cables from the How to use A Turn on the DVD player, insert a DVD disc. Haier LCD HDTV/DVD EN-8