Haier HLP021 User Manual - Page 20
Wash/Rinse/Spin
View all Haier HLP021 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English Selecting the Water Level • There are 3 pre-set water levels to chose from: Low, Medium and High and 1 manual overide selection using the knob. Your selection may depend on your wash load. Mph Manual Wafer Lavol • Turning the knob to "MANUAL" will add more water to your wash load as long as it is held in that position. Release knob after setting to the desired water level by manually adding water. Recommended Water Levels Load Size in lbs. 3.3 1.76 Less than 1.76 Water Level High Medium Low Approximate Water used in Gallons 8.72 5.81 3.70 Note: Incoming hot water must not exceed 122°F/50°C. End-of-Cycle Signal The machine will beep at the end of the cycle, indicating that the washing is complete. The "Wash/Rinse/Spin" indicator lights will still be ON. The washer will turn OFF automatically in approximately 10 minutes after the completion of the cycle. Closing the Top Lid For safety purposes, the top lid must always be closed during the wash process. If you open the top lid while the wash cycle is in progress, you will observe the following: • An alarm will sound. • The tub will not spin while the lid is open. • If the unit is in wash mode, it will stop running. Simply close the top lid and press the start/pause button to resume the cycle. 'On 19