Haier HLP021 User Manual - Page 24

English TROUBLESHOOTING GUIDE Before calling for service, determine the symptoms and follow the suggested solutions: Washer does not operate: • Check if the unit is plugged in. The plug may have come loose. • Check if the electrical wall receptacle is of proper voltage. • Check if the circuit breaker needs to be reset or if the fuse needs to be replaced. • Check if the washer is overloaded. Reload and redistribute the clothing to rebalance the machine. • Check if the door is open. You may have to close the door properly. • Check if the program selections are set properly. You may have to adjust the settings. • Check the Power "ON/OFF" button to see if it is in the OFF position. You may need to press the button to set it in the ON position. • Check if the "Start/Pause" button is on "Pause" mode. Press this button to start the wash process. • The wash process is paused. This is normal. The clothing sensor is checking to verify that there are clothes inside the washtub. Water will be added approximately 48 seconds later. • The pulsator pauses during incoming water flow in the wash and rinse cycle. This is normal. This prevents splashing during water inlet. • The washer may need to be reloaded and the clothes may need to be rebalanced. 23