Haier HLP21E User Manual - Page 16

Using process Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level. Spin time: the time from intermittent running to finishing When selecting "twice wash" program, first soak for about 20 minutes, pre-wash for about 8 minutes, then soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list includes the prewash time. When selecting "quick" program,wash,rinse and spin are set automatically,no procedure select can be done further 3 Adjust the "water level selection" knob to select suitable water level Three water levels available according to the laundries quantity: High; Medium; Low. Page 9 After the water inlet as per the preset water level, in case additional water quantity is required, please first set the button to the "Add water", push and hold it to perform automatic water inlet. When it reaches the suitable water level, you can turn it to the needed water level. After the water inlet under set water level, if higher water level is needed, please first turn the knob to "Add water", then turn back to needed water level. The washing machine will fill water to the new water level. 4 Press the "Start/Pause" button START PAUSE 5 Close the top lid 6 Washing finished If you open the top lid, the machine will stop working except for water filling and spinning It beeps to indicate the finishing of washing When the washing is finished, the three indicators of "wash" "rinse" "spin" are all on. The power will be switched off automatically about 10 minutes after the finishing of the washing