Haier HLP21E User Manual - Page 5

Introduction of the special functions Before Using Hand-wash type wash: The inner tub and pulsator rotate to opposite directions during washing to form current like the hand-wash moving. At the same time the washing effect is improved significantly because the wall of the inner tub also acts in washing. Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure: Back Front Bottom plate Screw soft items Adjust the installation position The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to confirm if it is horizontal. Adjust the adjustable foot: 1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot. 2.Fasten the nut after adjustment. adjustable nut Loosen Fasten High Low adjustable foot