Haier HLPW028BXW Installation Instructions - Page 33
Troubleshooting
View all Haier HLPW028BXW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ENGLISH TROUBLESHOOTING First try the solutions suggested here to possibly avoid the cost of a service call. WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. ERROR CODES When the washer senses an error all machine operations will stop, a series of 4 beeps will sound and an error code will be shown in the Estimated Time remaining display. ERROR CODE dO (Washer Lid is Open) Ld (Too Long to Drain) UL (Unbalanced Load) LF (Too Long to Fill) DESCRIPTION The washer has detected that the lid is open. The washer has detected that it is taking too long to completely drain water from the wash tub. The washer has detected an out of balance load and has failed to self-correct the condition. The washer is not level from side to side, or from front to back. The washer senses that it is taking too long to fill the wash tub or does not read a change in water level during a fill. 31 POSSIBLE CAUSE AND SOLUTION If the lid is opened during the wash cycle, the wash cycle will stop. Closing the lid should dismiss the error and resume normal operation. See Water in the "Troubleshooting" section. Call service center at 1-877-337-3639. Open the washer lid, redistribute the load, close the lid, and press the Start/Pause button to resume operation. Level the washer, open and close the washer lid and press the Start/Pause button to resume operation. See Water in the "Troubleshooting" section. Check for water leakage. Call service center at 1-877-337-3639.