Haier HLTW600AXW User Manual - Page 12

OPERATING INSTRUCTIONS Washing a load of laundry STEP 5: Set Delay Start Note: You can skip this step if you don't want this function. &KLOGORFN (FR 'HOD\ - You can set a period time in hours to delay your washing operation. - Press the "Delay" button once to enter the delay start setting function with the digital displaying your last setting time or "0" for initial setting with "Delay" light flashing. - Press the "Delay" button every time, the delay start time in hours displayed will change in sequence: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, then back to 0. Or, you can press and hold the "Delay" button to quickly adjust the setting time until your desired time displayed. - Select your desired delay start time. - When "0" is displayed, the Delay Start function will be cancelled. Notes: - If you don't press any button when you are setting delay start time in 3 seconds, the washer will return to remaining time display for selected washing program with "Delay" light ON. Press the button "Delay" again will back to "Delay" setting with light flashing. - If you want to change your cycle setting when you are setting delay start time, just rotate the knob or press relative option buttons. The display will change to remaining time for selected program with "Delay" light ON. - Any time you want to check the delay start setting, just press the "Delay" button, the display will show the setting delay start time. - Before you press the Start/Pause button, you can easily cancel this function by changing the cycle selection with the knob. Then you should reset all options as STEP 4. - THE DELAY START TIME CAN NOT BE CHANGED AFTER THE PROGRAM HAS BEEN STARTED. STEP 6: Start your washer Power Now, it's time to start your washer. Start/Pause - If you have selected desired Delay Start time, the "Delay" light will be ON and your washer will start count down the delay start time. - If you don't have any delay start setting or the delay start time has been finished, the unit will start your selected program. The relavant process light will flash accordingly. Soak Wash Rinse Spin Done Notes: You can just press the "Power" button to turn your washer OFF and then press again to turn it ON to cancel the Delay Start function. - When you do so, you should reset your setting program. Any time you pause the unit or open the lid, you should press the "Start/Pause" button to resume the operation. STEP 7: Unloading your laundry Soak Wash Rinse Spin Done - The "Done" light on the process bar will flash when your laundry work has been finished. - The washer will produce 6 beeps after the cycles done and the lid will be unlocked. 21 OPERATING INSTRUCTIONS Useful functions Child Lock Favorite Hold 3 Sec Energy Saver Child Lock Eco Delay Extra Heavy Heavy Medium Light Extra Light Hot Warm Eco Warm Cold Tap Cold Delay Soil Level Temp Hold 3 Sec Buzzer Buzzer This function is useful to prevent children from playing with the unit. - Press and hold the "Soil Level" and "Temp" buttons simultaneously for 3 seconds to activate this function. The red light "Child lock" will turn ON. - Press and hold the "Soil Level" and "Temp" buttons simultaneously again for 3 seconds to deactivate this function. The light "Child lock" will turn OFF. - When this function is activated, all buttons will be out of function except the POWER and DEACTIVATE function above. - You can just Power ON the unit and activate this function, then Power the unit OFF. This operation will help to keep the child from operating the unit. At this time, you should deactivate the function next time when you want to operate the unit. - When the Child Lock function is activated with the top lid OPEN, the unit will display "E3" for lid open alarm. You should close the lid in 20 seconds. The unit will alarm, display "CL" and drain all water out of the tub if the lid keeps open over 20 seconds. You can stop and clear the "CL" display easily by turning OFF the unit. - Any time a button is pressed, you washer will beep once. - When your washer finish a full cycle, it will beep 6 times. Energy Saver Favorite Hold 3 Sec Energy Saver Child Lock Eco Delay Extra Heavy Heavy Medium Light Extra Light Hot Warm Eco Warm Cold Tap Cold - You can stop the beeping sound by pressing the "Buzzer" button with the green light On. - To resume the beeping, press the button again with the light Off. Note: The beeping can't be stopped when the unit is in ERR status. You can power off the unit to stop the sound in ERR status. - This function will reduce the energy consumption by reducing washing time but increasing spinning time. - A longer spinning time will help to reduce the remaining moisture in your clothes so that you will cost less energy to dry them. Detergent use Your washer is designed to use high efficiency (HE) detergents. - For best cleaning results, use a high efficiency detergents such as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency detergents contain suds suppressors that reduce or eliminate suds. When fewer suds are produced, the load tumbles more efficiency and cleaning is maximized. - Reducing the amount of detergent may reduce the quality of cleaning. It is important to pre-treat stains, sort carefully by color and soil level, and avoid overloading. * Brand names are trademarks of their respective manufacturers. IMPORTANT: Regular detergent is not recommended. Use HE detergents only. 22